Table of Contents
Advertisement
No.
4
Effective reading width
Document Width
ISO A4
210 mm
8.27 inches
Letter
216 mm
8.5 inches
Legal
216 mm
8.5 inches
Note
Local copy: Printable reading width in local copy mode
5
Automatic document feeder (ADF)
6
Document skew
7
Document jam detection
8
Document jam removal
General Information
Table 1.5.1 (2/11) Basic Performance Specifications
Item
Communication
Mode/Paper width
G3/A4
G3/A4
G3/A4
Specifications
Effective reading
width
TX:
208 mm
8.19 inches
Local Copy: 200 mm
7.87 inches
TX:
215 mm
8.46 inches
Local Copy: 200 mm
TX:
215 mm
8.46 inches
Local Copy: 200 mm
7.87 inches
Up to 297 mm (11.69 inches) in length.
Maximum of. 20 documents, Letter or A4 (20-1b)
Maximum of 15 documents: Letter or A4 (13-28lb bond paper)
Documents shall be placed facedown on ADF stacker.
The first sheet will be fed first in the feeder and will exit
facedown in the document stacker.
Max. 2.6 mm (.102 inches) skew over a document of A4 length.
For a document longer than A4 length, occurrence of skew
exceeding 2.6 mm over any A4 length is 0.5% or less.
1) Transmission will stop and line disconnection will occur
when the end of a document is not detected within 356 mm
(14 inches) after scanning begins (except for the long docu-
ment scanning. Technical Function 11)
2) A jam will also be declared if the document does not reach
the scanning position within 10 seconds after the start of a
document feed.
Note: When a jam is detected during message transmission
from the feeder, the machine will stop scanning and
disconnect the line, but its receiving capability will
remain valid.
Manual release
1 - 10
Copy size
A4
Letter
7.87 inches
Legal
OKIOFFICE 44
Service Manual, P/N 59276801
Advertisement
Table of Contents
Troubleshooting
