Service Personnel Initial Settings Table 2.9.1 (3/7) - Oki OKIOFFICE44 Service Manual

Service Personnel Initial Settings Table 2.9.1 (3/7)

T.F.
Item
No.
10 MDY/DMY
11 Long document SCAN
12 Echo Protection
13 MH only
14 High-speed modem rate
15 T1 (TX), timeout value
Installation Procedure
Specifications
Switches LCD display and report print from month/
day/year to day/month/year or vice versa.
MDY/DMY selectable.
Switches the function of transmitting long-size docu-
ment (more than 380 mm).
ON : Unlimited (1 hour)
OFF : 380 mm. (14.96 inches)
Enables echo suppression for poor lines with echo,
usually during overseas transmissions. This bit set-
ting controls the following features.
ON: Enables
Echo Protection OFF
Ignore 1st DIS OFF
CED-DIS timer 75 ms
Tone for echo OFF
(TF-12 table)
OFF: Disables
Switches the function of limiting image compression
only to the MH codes.
ON : Coding scheme is MH only. When the
receiving image data is affected by noise on
the telephone line.
This affects all communications and should
only be used as a last resort.
OFF : Any of MH, MR and MMR.
Specifies the modem's starting speed, 14.4k, 9.6k, or
4.8kbps.
Registers the time duration (in seconds) for which the
fax waits for the remote station's answer.
This timer starts when the last dialled digit has been
sent in the automatic transmission mode.
* Selects the 3 digit timer
010 to 255 sec selectable (in one second steps).
2 - 21
Default
MDY
OFF
ON
ON
1.5 sec
ON
OFF
14.4 k
059 sec
OKIOFFICE 44
Service Manual, P/N 59276801
OFF