Service Personnel Initial Settings Table 2.9.1 (1/7) - Oki OKIOFFICE44 Service Manual

Service Personnel Initial Settings Table 2.9.1 (1/7)

T.F.
Item
No.
01 Service bit
02 Line monitor control
03 Country code
04 Time and date print
05 TSI print
Installation Procedure
Specifications
Switching serviceman/user operation.
ON : Service personnel's features are available.
OFF : Service personnel's features are not avail-
able.
To enable or disable the following functions:
• Drum (Total) and toner counter clear
• Protocol dump
• Dial parameters
• etc.
To enable continuous monitoring of phone line for
technical troubleshooting.
FP +06 (To select the loudness of monitoring)
ON : Enable
OFF : Disable
Example:
In case of transmission mode, the monitor
will be available during dialling, but the
monitor will be switched off automatically
after the elapse of specified time (about 5
sec.). However, when TF02 is set to ON,
the monitor is available during communi-
cation also.
Selecting the following country code:
USA, INT'L, GBR, IRL, NOR, SWE, FIN, DEN,
GER, HUN, TCH, POL, SUI, AUT, BEL, HOL, FRE,
ESP, ITA, GRE, AUS, NZL, SIN, HNG
Enables or disables the function of printing local date
and time at the top of the received page.
OFF/ ONCE/ALL selectable.
Note: • Set at receiver.
Switches the function of printing TSI data from re-
mote fax onto the received pages. TSI is printed at the
leading edge of first reproduced copy. (Set at re-
ceiver.)
When TF04 is set to "ALL", TSI is printed for the all
received pages.
ON : Enable
OFF : Disable
(Reference)
TSI; Transmitting Subscriber Identification
2 - 19
Default
OFF
OFF
USA
OFF
OKIOFFICE 44
Service Manual, P/N 59276801
ON