Oki OKIOFFICE44 Service Manual page 143

Unit
(1) Disassembly procedure
a) First, carry out the disassembly procedure up to
the point of the 4.1.3.2 (Cover-Rear, Cover-Main
etc.).
b) Board-R44:
Disconnect all connectors.
c) Remove the five screws and remove the Board
R44.
d) OKIOFFICE 44 Power Supply Unit:
Disconnect all connectors.
e) Remove the screws and remove the OKIOFFICE
44 Power Supply Unit.
(2) Reassembly procedure
Reverse the disassembly procedures.
Disassembly
Rev. 2
4 - 15
Service Manual, P/N 59276801
Screw
Board-R44
(CP4.1 Fig. 22)
Power Supply Unit
(CP4.1 Fig. 21)
OKIOFFICE 44