Registering The Facsimile Model No - Oki OKIOFFICE44 Service Manual

2.2.2 Registering the Facsimile Model No.

1) Search the directory in which the system is registered. When the system is found, register the model
number.
2) Insert a disk corresponding to the model into drive A, then press any key. The model number is displayed
and the confirmation screen is displayed.
3) When the model number to be registered is correct, enter [Y]. The program corresponding to the model
number is now registered. If not correct, enter [N]. Then repeat from step 1) again.
RMCS System
Remote Management Center System
<< FAX SETTING >>
FAX Disk set
Push any key
Press the Esc key to cancel.
Remote Management Center System
<< FAX SETTING >>
FAX Disk set
Push any key
OOOOOOOOOO
Are you sure (Y or N)? Y
Press the Esc key to cancel.
G - 8 OKIOFFICE 44
Service Manual, P/N 59276801