2.2.4 Updating the Password
1) Search the directory in which the system is registered. When the system is found, the old password is
displayed on the screen requesting entry of a new password is displayed.
2) Register a new password of up to 15 alphanumeric characters excluding [\], ["].
Press [Enter] to display the confirmation screen.
3) When the setting is correct, enter [Y]. The password is now updated. If not correct, enter [N]. Then repeat
from step 1) again. If the system operator does not define the PASSWORD, PASSWORD is not checked
when RMCS starting.
RMCS System
Remote Management Center System
<< PASSWORD UPDATE >>
OLD PASSWORD
= [1234567890
NEW PASSWORD
= [_
Press the Esc key to cancel.
Remote Management Center System
<< PASSWORD UPDATE >>
OLD PASSWORD
= [1234567890
NEW PASSWORD
= [ABCDEFGH
Are you sure (Y or N)? Y
Press the Esc key to cancel.
G - 10
]
]
]
]
OKIOFFICE 44
Service Manual, P/N 59276801