Feature Specifications Table 2.9.3 (2/3) - Oki OKIOFFICE44 Service Manual

Feature Specifications Table 2.9.3 (2/3)

No. Item
4 Automatic redial
5 Last No. redial
6 Group dial
7 Telephone directory and location ID
(Alpha search)
8 Voice request
9 Local copy
10 Multiple local copy
11 Manual loading feeder
Installation Procedure
Specifications
PTT parameter setting disables or enables this feature, and speci-
fies redial times and redial intervals.
* See 2.9.12 for the service bit condition depending on PTT
parameters.
"REDIAL" key is provided. There is no limit on number of repeat
attempts.
• 5 dialling groups
Maximum. 55 locations.
Grouping some one-touch keys and some two-digit auto dial codes
to which telephone numbers have been assigned.
This group setting makes broadcast operation simple.
In addition to fax numbers, an alpha/ numeric name can be
assigned to each of one-touch keys and two-digit dial codes, 01 to
45 for OKIOFFICE 44.
This name is called a location ID.
Any location ID can be searched and displayed on LCD.
Then direct dialling to the ID's station can be performed.
There are two methods of searching:
(1) Search based on the first character specified.
(2) Searching by displaying all registered location IDs
one after another in the lexicographical order.
Location ID: Maximum. 15 characters
A voice request from the transmitter is available only upon
completion of the total message transmission.
A voice request from the receiver is available at the end of each
page being received.
Printing resolution:
Horizontal: 300 dpi
Vertical: 7.7 or 15.4 line/mm or variable
Up to 50 copies
One single sheet from the feeder above the first recording paper
cassette can be copied.
Example of sheets: Transparency for an overhead projector
2 - 39 OKIOFFICE 44
Service Manual, P/N 59276801