Debug Hardware Arbiter - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

debug hardware arbiter

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug hardware arbiter
To configure debugging for the hardware arbiter driver, use the debug hardware arbiter command in
EXEC mode. To disable a debug command, use the no form of the command or use the no debug all
command to turn off all debugging.
Syntax Description
error
flow
group number
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the system output when the debug hardware arbiter error group
command is issued:
switch# debug hardware arbiter error group 1
Related Commands Command
no debug all
show hardware
Cisco MDS 9000 Family Command Reference
6-58
debug hardware arbiter {error | flow} [group number]}
no debug hardware arbiter {error | flow} [group number]}
Modification
This command was introduced.
Description
Disables all debugging.
Displays switch hardware inventory details.
Enables debugging for hardware arbiter kernel errors.
Enables debugging for hardware arbiter kernel flow.
(Optional) Restricts debugging to the specified group. The range is 0 to
17.
Chapter 6 Debug Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x