Clear Fcanalyzer - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

clear fcanalyzer

To clear the entire list of configured hosts for remote capture, use the clear fcanalyzer command in
EXEC mode.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC.
Command History Release
1.0(2)
Usage Guidelines This command clears only the list of configured hosts. Existing connections are not terminated.
Examples The following example shows how to clear the entire list of configured hosts for remote capture:
switch# clear fcanalyzer
Related Commands Command
show fcanalyzer
OL-18089-01, Cisco MDS NX-OS Release 4.x
clear fcanalyzer
Modification
This command was introduced.
Description
Displays the list of hosts configured for a remote capture.
Cisco MDS 9000 Family Command Reference
clear fcanalyzer
4-45