Ip Routing - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ip routing

To enable the IP forwarding feature, use the ip routing command in configuration mode. To disable this
feature, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
Disabled.
Command Modes
Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples
The following example enables the IP forwarding feature:
switch# config terminal
switch(config)# ip routing
Related Commands Command
show ip routing
OL-18089-01, Cisco MDS NX-OS Release 4.x
ip routing
no ip routing
Modification
This command was introduced.
Description
Displays the IP routing state.
Cisco MDS 9000 Family Command Reference
ip routing
11-57