Rmdir - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

rmdir

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
rmdir
To delete an existing directory from the Flash file system, use the rmdir command in EXEC mode.
Syntax Description
bootflash:
slot0:
volatile:
directory
Defaults Uses the current default directory.
Command Modes EXEC Mode.
Command History Release
1.0(2)
Usage Guidelines This command is only valid on Flash file systems.
The rmdir command deletes an existing directory at the current directory level or at a specified directory
level. The directory must be empty to be deleted.
Examples The following example deletes the directory called test in the slot0 directory.
switch# rmdir slot0:test
The following example deletes the directory called test at the current directory level. If the current
directory is slot0:mydir, this command deletes the slot0:mydir/test directory.
switch# rmdir test
Related Commands Command
dir
mkir
Cisco MDS 9000 Family Command Reference
20-24
rmdir [bootflash: | slot0: | volatile:]directory
Source or destination location for internal bootflash memory.
Source or destination location for the CompactFlash memory or PCMCIA
card.
Source or destination location for volatile file system.
Name of the directory to remove.
Modification
This command was introduced.
Description
Displays a list of files on a file system.
Creates a new directory in the Flash file system.
Chapter 20 R Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x