Snmp-Server Enable Traps Fcdomain - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

snmp-server enable traps fcdomain

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
snmp-server enable traps fcdomain
To enable SNMP FC domain traps, use the snmp-server enable traps fcdomain command in
configuration mode. To disable FC domain trap, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Configuration mode.
Command History Release
4.1(1b)
Usage Guidelines None.
Examples
The following example shows how to enable SNMP FC domain traps.
switch# config t
switch(config)# snmp-server enable traps fcdomain
switch(config)#
switch(config)# no snmp-server enable traps fcdomain
switch(config)#
Related Commands Command
show snmp
show snmp trap
Cisco MDS 9000 Family Command Reference
21-48
snmp-server enable traps fcdomain
no snmp-server enable traps fcdomain
Modification trap
This command was introduced.
Description
Displays SNMP information.
Displays SNMP traps.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x