Clear Counters (Exec Mode) - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

clear counters (EXEC mode)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear counters (EXEC mode)
To clear the interface counters, use the clear counters command in EXEC mode.
Syntax Description
all
interface
number
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
The following table lists the keywords and number ranges for the clear counters interface types:
Keyword
fc
gigabitethernet
mgmt
port-channel
sup-fc
vsan
This command clears counter displayed in the show interface command output.
Examples
The following example shows how to clear counters for a VSAN interface:
switch# clear counters interface vsan 13
Related Commands Command
show interface
Cisco MDS 9000 Family Command Reference
4-36
clear counters {all | interface {fc | mgmt | port-channel | sup-fc | vsan} number}
Clears all interface counters.
Clears interface counters for the specified interface.
Specifies the number of the slot or interface being cleared.
Modification
This command was introduced.
Interface Type
Fibre Channel
Gigabit Ethernet
Management
PortChannel
Inband
VSAN
Description
Displays interface information.
Chapter 4 C Commands
Number
1- 2 or 1 - 9 (slot)
1- 2 or 1 - 9 (slot)
0-0 (management interface)
1-128 (PortChannel)
0-0 (Inband interface)
1- 4093 (VSAN ID)
OL-18089-01, Cisco MDS NX-OS Release 4.x