Qos Enable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 19 Q Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

qos enable

To enable the QoS priority assignment for data traffic feature on the Cisco MDS 9000 family of switches,
use the qos enable command in configuration mode. To disable the QoS priority assignment for control
traffic feature, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History Release
1.3(1)
Usage Guidelines
None.
Examples The following example disables the QoS priority assignment feature.
switch# config terminal
switch(config)# qos enable
Related Commands Command
show qos
OL-18089-01 Cisco MDS NX-OS Release 4.x
qos enable
no qos enable
Modification
This command was introduced.
Description
Displays configured QoS information.
Cisco MDS 9000 Family Command Reference
qos enable
19-5