Fcrxbbcredit Extended Enable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

fcrxbbcredit extended enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fcrxbbcredit extended enable
To enable Fibre Channel extended buffer-to-buffer credits (BB_credits), use the fcrxbbcredit extended
enable command in configuration mode. To disable the feature, use the no form of the command.
Syntax Description This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines Performing the fcrxbbcredit extended enable command enables the switchport fcrxbbcredit
extended command.
Note This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following example shows how to enable Fibre Channel extended BB_credits.
switch# config terminal
switch(config)# fcrxbbcredit extended enable
The following example shows how to disable Fibre Channel extended BB_credits.
switch# config terminal
switch(config)# no fcrxbbcredit extended enable
Related Commands Command
switchport fcrxbbcredit extended Configures Fibre Channel extended BB_credits on an interface.
show interface
Cisco MDS 9000 Family Command Reference
8-44
fcrxbbcredit extended enable
no fcrxbbcredit extended enable
Modification
This command was introduced.
Description
Displays interface information and status.
Chapter 8 F Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x