Scheduler Aaa-Authentication - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

scheduler aaa-authentication

To use the command scheduler feature, a remote user must use the scheduler aaa-authentication
command to specify an AAA authentication password.
Syntax Description username username
password
0
7
password
Defaults None.
Command Modes
Configuration mode.
Command History Release
3.0(3)
Usage Guidelines This command is for remote users who need to use the scheduler feature.
Examples The following example specifies a remote user's password.
switch# config t
switch(config)# scheduler aaa-authentication password newpwd
The following example specifies a remote user's password in clear text.
switch# config t
switch(config)# scheduler aaa-authentication password 0 newpwd
The following example specifies a remote user's encrypted password.
switch# config t
switch(config)# scheduler aaa-authentication password 7 newpwd2
The following example specifies a remote user's name and AAA authentication password.
switch# config ts
switch(config)# scheduler aaa-authentication username admin1 password newpwd3
OL-18089-01, Cisco MDS NX-OS Release 4.x
scheduler aaa-authentication [username username] password [0
Modification
This command was introduced.
Specifies the remote user's name.
Specifies the password of the logged-in remote user for AAA
authentication.
Indicates the password is in clear text.
Indicates the password is encrypted.
Specifies the remote user's password.
Cisco MDS 9000 Family Command Reference
scheduler aaa-authentication
|
7] password
21-9