Fctrace - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 8 F Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

fctrace

To trace the route to an N port, use the fctrace command in EXEC mode.
Syntax Description device-alias aliasname
fcid fcid
pwwn pwwn-id
vsan vsan-id
timeout seconds
Defaults By default, the period to wait before timing out is 5 seconds.
Command Modes
EXEC mode.
Command History Release
1.0(2)
2.0(x)
Usage Guidelines None.
Examples The following example traces a route to the specified fcid in VSAN 1.
switch# fctrace fcid 0x660000 vsan 1
Route present for :
20:00:00:05:30:00:5f:1e(0xfffc65)
Latency: 0 msec
20:00:00:05:30:00:61:5e(0xfffc66)
Latency: 0 msec
20:00:00:05:30:00:61:5e(0xfffc66)
The following example traces a route to the specified device alias in VSAN 1.
switch# fctrace device-alias x vsan 1
Route present for : 21:01:00:e0:8b:2e:80:93
20:00:00:05:30:00:4a:e2(0xfffc67)
OL-18089-01, Cisco MDS NX-OS Release 4.x
fctrace {device-alias aliasname | fcid fcid vsan vsan-id [timeout value] | pwwn pwwn-id [timeout
seconds]}
Specifies the device alias name. Maximum length is 64 characters.
The FCID of the destination N port, with the format 0xhhhhhh
The PWWN of the destination N port, with the format
hh:hh:hh:hh:hh:hh:hh:hh.
Specifies a VSAN ID. The range is 1 to 4093.
Configures the timeout value. The range is 1 to 10.
Modification
This command was introduced.
Added the device-alias aliasname option.
0x660000
Cisco MDS 9000 Family Command Reference
fctrace
8-57