Ficon Logical-Port Assign Port-Numbers - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

ficon logical-port assign port-numbers

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ficon logical-port assign port-numbers
To reserve FICON port numbers for logical interfaces on the switch, use the ficon logical-port assign
port-numbers command in configuration mode. To release the port numbers, use the no form of the
command.
Syntax Description
port-numbers
Defaults
None.
Command Modes
Configuration mode.
Command History Release
3.0(1)
Usage Guidelines You must reserve port numbers for logical interfaces, such as FCIP and PortChannels, if you plan to use
them.
You cannot change or release port numbers for interfaces that are active. You must disable the interfaces
using the shutdown command.
This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
Note
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following example reserves port numbers 230 through 249 for FCIP and PortChannel interfaces.
switch(config)# ficon logical-port assign port-numbers 230-249
The following example reserves port numbers 0xe6 through 0xf9 for FCIP and PortChannel interfaces.
switch(config)# ficon logical-port assign port-numbers 0xe6-0xf9
The following example releases the port numbers.
switch(config)# no ficon logical-port assign port-numbers 230-249
Related Commands Command
show ficon
Cisco MDS 9000 Family Command Reference
8-64
ficon logical-port assign port-numbers [port-numbers]
no ficon logical-port assign port-numbers [port-numbers]
Specifies the range of port numbers to assign. The range can be 0 through
153 or 0x0 through 0x99.
Modification
This command was introduced.
Description
Displays configured FICON details.
Chapter 8 F Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x