Aaa Authentication Dhchap Default - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

aaa authentication dhchap default

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
aaa authentication dhchap default
To configure DHCHAP authentication method, use the aaa authentication dhchap default command
in configuration mode. To revert to factory defaults, use the no form of the command.
Syntax Description group group-name
local
none
Defaults Local user name authentication.
Command Modes Configuration mode.
Command History Release
1.3(1)
Usage Guidelines
The local option disables other authentication methods and configures local authentication to be used
exclusively.
Specify the currently configured command preceded by a no in order to revert to the factory default.
Examples The following example enables all DHCHAP authentication to be performed using remote TACACS+
servers which are members of the group called TacServers, followed by the local authentication:
switch# config terminal
switch(config)# aaa authentication dhchap default group TacServer
The following example reverts to the local authentication method (default):
switch(config)# no aaa authentication dhcahp default group TacServer
Related Commands Command
show aaa authentication
Cisco MDS 9000 Family Command Reference
2-4
aaa authentication dhchap default {group group-name [none] | none} | local [none] | none}}
no aaa authentication dhchap default {group group-name [none] | none} | local [none] | none}
Specifies the group name authentication method. The group name is a
maximum of 127 characters.
Specifies local user name authentication (default).
Specifies no authentication.
Modification
This command was introduced.
Description
Displays the configured authentication methods.
Chapter 2 A Commands
OL-18089-02, Cisco MDS NX-OS Release 4.x