Debug Plog - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

debug plog

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug plog
To enable debugging of persistent logging (PLOG), use the debug plog command in EXEC mode. To
disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description
error
trace
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples The following example displays the system output when the debug plog command is issued:
switch# debug plog
Related Commands Command
no debug all
Cisco MDS 9000 Family Command Reference
6-88
debug plog {error | trace}
no debug plog {error | trace}
Enables debugging of PLOG error conditions.
Enables debugging of PLOG events.
Modification
This command was introduced.
Description
Disables all debugging.
Chapter 6 Debug Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x