Snmp-Server Community - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

snmp-server community

To set the SNMP server community string, use the snmp-server community command in configuration
mode. To remove the SNMP servere community string, use the no form of the command.
Syntax Description community string
group group-name
Defaults
None.
Command Modes Configuration mode.
Command History Release
4.1(1b)
Usage Guidelines
None.
Examples
The following example sets the SNMP server community string.
switch# config t
switch(config)# snmp-server community public group network-operator
switch(config)#
switch(config)# no snmp-server community public group network-operator
switch(config)#
Related Commands Command
show snmp
OL-18089-01, Cisco MDS NX-OS Release 4.x
snmp-server {community string [group group-name]}
no snmp-server {community string [group group-name]}
SNMP community string.
(Optional) Group to which the community belongs.
Modification
This command was introduced.
Description
Displays SNMP information.
Cisco MDS 9000 Family Command Reference
snmp-server community
21-43