Chapter 16 N Command; Native-Autonomous-Fabric-Num - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

native-autonomous-fabric-num

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
native-autonomous-fabric-num
To create an IVR persistent FC ID database entry, use the native-autonomous-fabric-num command in
fcdomain database configuration submode. To delete all IVR persistent FC ID database entries for a
given AFID and VSAN, use the no form of the command.
Syntax Description
afid-num
native-vsan vsan-id
domain domain-id
Defaults None.
Command Modes fcdomain database configuration submode.
Command History Release
2.1(2)
Usage Guidelines
There is only one domain ID associated with an AFID and VSAN. If you change the domain ID, all the
associated FC ID mapping records are also changed.
Examples The following example shows how to create an entry for a native AFID, VSAN, and domain.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config-fcdomain)# native-autonomous-fabric-num 20 native-vsan 30 domain 15
switch(config-fcdomain-fcid)#
The following example shows how to remove all entries for a native AFID and VSAN.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config-fcdomain)# no native-autonomous-fabric-num 20 native-vsan 30
Related Commands Command
ivr fcdomain database
autonomous-fabric-num
show ivr fcdomain database
Cisco MDS 9000 Family Command Reference
16-2
native-autonomous-fabric-num afid-num native-vsan vsan-id domain domain-id
no native-autonomous-fabric-num afid-num native-vsan vsan-id domain domain-id
Specifies the native AFID. The range is 1 to 64.
Specifies the native VSAN ID. The range is 1 to 4093.
Specifies the domain ID. The range is 1 to 239.
Modification
This command was introduced.
Description
Creates IVR persistent FC IDs.
Displays IVR fcdomain database entry information.
Chapter 16 N Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x