Chapter 4
C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
cimserver
To configure the Common Information Models (CIM) parameters, Use the cimserver command. Use the
no form of this command to revert to factory defaults.
Syntax Description
certificate
bootflash:
slot0:
volatile:
filename
clearcertificate
enable
enablehttp
enablehttps
Defaults
None.
Command Modes
Configuration mode.
Command History
Release
1.3(1)
Usage Guidelines
A CIM client is required to access the CIM server. The client can be any client that supports CIM.
OL-18089-01, Cisco MDS NX-OS Release 4.x
cimserver {certificate {bootflash:filename | slot0:filename | volatile:filename} | clearcertificate
filename | enable | enablehttp | enablehttps}
no cimserver {certificate {bootflash:filename | slot0:filename | volatile:filename} |
clearcertificate filename enable enablehttp enablehttps}
Installs the Secure Socket Layer (SSL) certificate
Specifies the location for internal bootflash memory.
Specifies the location for the CompactFlash memory or PCMCIA card.
Specifies the location for the volatile file system.
The name of the license file with a .pem extension.
Clears a previously installed SSL certificate.
Enables and starts the CIM server.
Enables the HTTP (non-secure) protocol for the CIM server (default).
Enables the HTTPS (secure) protocol for the CIM server.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
cimserver
4-23