Debug Fm - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug fm

To enable feature manager debugging, use the debug fm command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description error
flow
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example displays the system output when the debug fm flow command is issued:
switch# debug fm flow
switch# 2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: ----------- EVENT START
2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: received MTS message:
2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: Src: 0x00000601/27
ID: 0x006A0FC4
HA_SEQNO: 0x00000000
2005 Mar 10 02:40:19 feature-mgr: fm_handle_cmi_get_feature_op: Get feature (1) op request
2005 Mar 10 02:40:19 feature-mgr: fm_handle_cmi_get_feature_op: Reply to get feature ivr
op request: op 2, op_state 0, result 0x0 (success)
2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: ----------- EVENT START
2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: received MTS message:
2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: Src: 0x00000601/27
ID: 0x006A0FC6
HA_SEQNO: 0x00000000
2005 Mar 10 02:40:19 feature-mgr: fm_handle_cmi_get_feature_op: Get feature (1) op request
2005 Mar 10 02:40:19 feature-mgr: fm_handle_cmi_get_feature_op: Reply to get feature ivr
op request: op 2, op_state 0, result 0x0 (success)
Related Commands Command
no debug all
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug fm {error | flow}
no debug fm {error | flow}
Modification
This command was introduced.
Size: 160 [REQ] Opc: 8922 (MTS_OPC_FM_CMI_GET_FEATURE_OP) RR: 0x006A0FC4
TS: 0x2524B48D52B53
Size: 160 [REQ] Opc: 8922 (MTS_OPC_FM_CMI_GET_FEATURE_OP) RR: 0x006A0FC6
TS: 0x2524B48EBF55D
Description
Disables all debugging.
Enables debugging for feature manager error conditions.
Enables debugging for the feature manager flow.
REJ:0
REJ:0
Cisco MDS 9000 Family Command Reference
Dst: 0x00000601/121
SYNC:0
Dst: 0x00000601/121
SYNC:0
debug fm
6-55