Code-Page - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

code-page

Use the code-page command to configure the EBCDIC format. To disable the configuration or to revert
to factory defaults, use the no form of the command.
Syntax Description code-page
brazil
france
international-5
italy
japan
spain-latinamerica
uk
us-canada
Defaults None.
Command Modes Configuration mode.
Command History Release
1.3(1)
Usage Guidelines
This is an optional configuration. If you are not sure of the EBCDIC format to be used, we recommend
retaining the us-canada (default) option.
Examples The following example configures the italy EBCDIC format:
switch(config)# ficon vsan 2
switch(config-ficon)# code-page italy
The following example reverts to the factory default of using the us-canada EBCDIC format:
switch(config-ficon)# no code-page
OL-18089-01, Cisco MDS NX-OS Release 4.x
code-page brazil | france | international-5 | italy | japan | spain-latinamerica | uk | us-canada
no code-page brazil | france | international-5 | italy | japan | spain-latinamerica | uk | us-canada
Configures code page on a FICON-enabled VSAN
Configures the brazil EBCDIC format.
Configures the france EBCDIC format.
Configures the international-5 EBCDIC format.
Configures the italy EBCDIC format.
Configures the japan EBCDIC format.
Configures the spain-latinamerica EBCDIC format.
Configures the uk EBCDIC format.
Configures the us-canada EBCDIC format.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
code-page
4-111