Fcs Register - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

fcs register

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fcs register
To register FCS attributes, use the fcs register command in configuration mode. To disable this feature,
use the no form of the command.
Syntax Description platform name name
vsan vsan-id
Defaults None.
Command Modes
Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example shows how to register FCS attributes.
switch# config terminal
switch(config)# fcs register
switch(config-fcs-register)# platform Platform1 vsan 10
Related Commands Command
show fcs
Cisco MDS 9000 Family Command Reference
8-46
fcs register
platform name name vsan vsan-id
fcs register
no platform name name vsan vsan-id
Specifies name of the platform to register. Maximum size is 255 characters.
Specifies the VSAN ID. The range is 1 to 4096.
Modification
This command was introduced.
Description
Displays fabric configuration server information.
Chapter 8 F Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x