Destination-Profile - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

destination-profile

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
message-size
message-size
transport-method
email
http
Defaults
None.
Command Modes
Call Home configuration submode.
Command History Release
1.0(2)
NX-OS 4.1(3)
Usage Guidelines None.
Examples
The following example shows how to configure XML destination profiles for the HTTP URL:
switch(config-callhome)# destination-profile XML-destination http http://site.service.com
switch(config-callhome)# no destination-profile XML-destination http
http://site.service.com
The following example enables the transport method for destination profile:
switch(config-callhome)# destination-profile XML-destination transport-method http
switch(config-callhome)# no destination-profile XML-destination transport-method http
switch(config-callhome)#
switch(config-callhome)# destination-profile XML-destination transport-method email
switch(config-callhome)# no destination-profile XML-destination transport-method email
switch(config-callhome)#
The following example shows how to configure full-text destination profiles:
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# destination-profile full-txt-destination email-addr
person@place.com
switch(config-callhome)# destination-profile full-txt-destination message-size 1000000
The following example shows how to configure short-text destination profiles:
switch(config-callhome)# destination-profile short-txt-destination email-addr
person@place.com
switch(config-callhome)# destination-profile short-txt-destination message-size 100000
Cisco MDS 9000 Family Command Reference
5-18
Configures the maximum message size (default 2500000).
Specifies Call Home message sending transport method.
Specifies the E-mail transport method.
Specifies the HTTP transport method.
Modification
This command was introduced.
Added the HTTPs URL and transport method for syntax description.
End with CNTL/Z.
OL-18089-01, Cisco NX-OS Release 4.x
Chapter 5 D Commands