Fctimer Commit - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 8 F Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

fctimer commit

To apply the pending configuration pertaining to the Fibre Channel timer (fctimer) Cisco Fabric Services
(CFS) distribution session in progress in the fabric, use the fctimer commit command in configuration
mode.
Syntax Description This command has no other arguments or keywords.
Defaults
None.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines None.
Examples
The following example shows how to commit changes to the active Fibre Channel timer configuration.
switch# config terminal
switch(config)# fctimer commit
Related Commands Command
fctimer distribute
show fctimer
OL-18089-01, Cisco MDS NX-OS Release 4.x
fctimer commit
Modification
This command was introduced.
Description
Enables CFS distribution for fctimer.
Displays fctimer information.
Cisco MDS 9000 Family Command Reference
fctimer commit
8-55