Distribute - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 5 D Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

distribute

To enable distribution of the Call Home function using CFS, use the distribute command in Call Home
configuration submode. To disable this feature, use the no form of the command.
Syntax Description This command has no other arguments or keywords.
Defaults
None.
Command Modes
Call Home configuration submode.
Command History Release
2.0(1b)
Usage Guidelines None.
Examples
The following example shows how to enable distribution of the Call Home function using CFS:
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# distribute
Related Commands Command
callhome
callhome test
show callhome
OL-18089-01, Cisco NX-OS Release 4.x
distribute
no distribute
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
End with CNTL/Z.
Cisco MDS 9000 Family Command Reference
distribute
5-37