Debug Rd-Reg - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug rd-reg

To enable debugging for the list of devices using the read-register feature, use the debug rd-reg
command in EXEC mode. To disable a debug command, use the no form of the command or use the no
debug all command to turn off all debugging.
Syntax Description device-name
register address
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example displays the system output when the debug rd-reg abc command is issued:
switch# debug rd-reg abc
Related Commands Command
no debug all
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug rd-reg [device-name | register address]
Modification
This command was introduced.
Description
Disables all debugging.
(Optional) Specifies the device name for the required device.
(Optional) Specifies the register address for the required device.
Cisco MDS 9000 Family Command Reference
debug rd-reg
6-97