Channel Mode Active - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

channel mode active

To enable channel mode on a PortChannel interface, use the channel mode active command. To disable
this feature, use the no form of the command.
Syntax Description This command has no other arguments or keywords.
Defaults
Enabled.
Command Modes
Interface configuration submode.
Command History Release
2.0(x)
Usage Guidelines This command determines the protocol behavior for all the member ports in the channel group associated
with the port channel interface.
Examples The following example shows how to disable channel mode on a PortChannel interface:
switch# config terminal
switch(config)# interface port-channel 10
switch(config-if)# no channel mode active
Related Commands Command
show interface port-channel
OL-18089-01, Cisco MDS NX-OS Release 4.x
channel mode active
no channel mode
Modification
This command was introduced.
Description
Displays PortChannel interface information.
Cisco MDS 9000 Family Command Reference
channel mode active
4-21