Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 324

disable
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
disable
To disable the Call Home function, use the disable command in Call Home configuration submode.
Syntax Description
This command has no other arguments or keywords.
Defaults None.
Command Modes Call Home configuration submode.
Command History Release
1.0(2)
Usage Guidelines
To enable the Call Home function, use the enable command.
Examples
The following example shows how to disable the Call Home function:
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# disable
Related Commands Command
callhome
callhome test
show callhome
Cisco MDS 9000 Family Command Reference
5-32
disable
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
End with CNTL/Z.
OL-18089-01, Cisco NX-OS Release 4.x
Chapter 5 D Commands