Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 868

portaddress
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The following example enables the selected port address and reverts to the factory default of the port
address not being blocked.
switch(config-ficon-portaddr)# no block
The following example prohibits port address 1 in VSAN 2 from talking to ports 3.
switch(config-ficon-portaddr)# prohibit portaddress 3
The following example removes port address 5 from a previously-prohibited state.
switch(config-ficon-portaddr)# no prohibit portaddress 5
The following example assigns a name to the port address.
switch(config-ficon-portaddr)# name SampleName
The following example deletes a previously configured port address name.
switch(config-ficon-portaddr)# no name SampleName
Related Commands Command
show ficon
Cisco MDS 9000 Family Command Reference
18-36
Description
Displays configured FICON details.
Chapter 18 P Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x