Debug Callhome - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug callhome

To enable debugging for the Call Home function, use the debug callhome command in EXEC mode. To
disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description
all
events
mts
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
The debug callhome command, when used with the all parameter, displays the troubleshooting
information for both Call Home event traces and a dump of the messaging and transaction service (MTS)
messages that the Call Home function receives.
The debug Call Home function displays event traces for both successful and unsuccessful Call Home
Note
e-mail transmissions.
Examples
The following example displays the system output when the debug callhome events command is issued:
switch# debug callhome events
2005-03-09T05:37:21 2005 Mar
2005 Mar
2005 Mar
2005 Mar
2005 Mar
Entering function do_event_correlation
2005 Mar
2005 Mar
2005 Mar
2005 Mar
2005 Mar
Mar
2005 Mar
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug callhome {all | events | mts}
no debug callhome {all | events | mts}
Modification
This command was introduced.
9 05:37:21 callhome: filling in the header list
9 05:37:21 callhome: filling up the chassis list
9 05:37:21 callhome: filling up the main body list
9 05:37:21 callhome: filling up the fru list 2005 Mar
9 05:37:21 callhome: getting dest profiles for alert group test
9 05:37:21 callhome: getting dest profiles for alert group cisco-tac
9 05:37:21 callhome: Applying the event rule for destination profile full_txt
9 05:37:21 callhome: Applying the event rule for destination profile short_txt
9 05:37:21 callhome: Applying the event rule for destination profile xml 2005
9 05:37:21 callhome: Applying the event rule for destination profile basu
9 05:37:21 callhome: Exiting function do_event_correlation
Enables debugging for all Call Home features.
Enables debugging for all Call Home events.
Enables debugging for all Call Home tx/rx packets of MTS.
9 05:37:21 callhome: filling in name field with Test
Cisco MDS 9000 Family Command Reference
debug callhome
9 05:37:21 callhome:
6-7