Table of Contents
Advertisement
Backup software and drivers
Backup software
For optimum performance it is important to use a backup application that is appropriate for
your system's configuration. In a direct attach configuration, where the tape drive is attached
to a standalone server, you can use backup software that is designed for a single server
environment. In network configurations you will need backup software that supports enterprise
environments. HP, Veritas, Legato and Computer Associates all provide suitable products.
Further details about these products can be found on the software vendor's web site.
Make sure you have a backup application that supports Ultrium Generation 2 tape drives and
download any upgrades or patches, if required.
Drivers
Windows users
Before you install the tape drive, download the driver from the manufacturer's web site. Refer
to the accompanying README file for specific installation instructions for Windows NT and
Windows 2000/XP drivers. This will tell you whether you need to install the driver before or
after installing the tape drive.
UNIX users
The recommended backup applications use the operating system's standard, built-in device
drivers. To upgrade drivers we recommend that you patch to the latest version of the operating
system or configure device files.
IA64 users
If you are installing on IA64, check the manufacturer's web site for the latest information on
the availability of backup application upgrades and drivers.
5 5
Advertisement
Table of Contents
