Choosing A Location; Table 1 Location Criteria - Freecom VALUELOADER DLT User Manual

Installing the ValueLoader

Choosing a Location

Choosing a Location

Table 1 Location
Criteria
6 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
Choose a location that meets the following criteria (see
for more specifications):
Requirement
Standalone
requirements
Rack requirements
Room temperature
Power source
Weight
Air quality
Description
Select a location that is flat, sturdy, level, and
close to a host server. Do not place the
ValueLoader on the floor or other carpeted
surface.
Do not place the ValueLoader on its
Caution:
side or upside down or stack items
that weigh more than 15 kg (33 lbs)
on top of the ValueLoader.
Standard 19-inch rack with 2U of clearance.
10-35° C (50-95° F)
AC power voltage: 100-127 VAC; 200-240 VAC
Line frequency: 50-60 Hz
Locate the AC outlet near the
Note:
ValueLoader. The AC power cord is the
product's main AC disconnect device
and must be easily accessible at all
times.
10 kg (22 lbs)
Minimal sources of particulate contamination.
Avoid areas near frequently used doors and
walkways, stacks of supplies that collect dust,
printers, or smoke-filled rooms.
Excessive dust and debris can
Caution:
damage tapes and tape drives.
1
appendix A