Choosing A Location; Table 1 Location Criteria - Freecom VALUELOADER LTO User Manual

Installing the ValueLoader

Choosing a Location

Choosing a Location

Table 1 Location
Criteria
6
Choose a location that meets the following criteria. (See
appendix A for more specifications.)
Requirement
Work surface
(standalone
installation)
Rack requirements
Room temperature
Power source
Weight
Air quality
ValueLoader LTO Tape Autoloader User Manual
Description
Select a location that is flat, level, sturdy, and
close to a host server. Do not place the
ValueLoader on the floor or other carpeted
surface.
Do not place the ValueLoader on its
Caution:
side or upside down, or stack items
that weigh more than 15 kg (33 lbs)
on top of the ValueLoader.
Standard 19-inch rack with a clearance of 2U.
10-35° C (50-95° F)
AC power voltage: 100-127 VAC; 200-240 VAC
Line frequency: 50-60 Hz
Locate the AC outlet near the
Note:
ValueLoader. The AC power cord is the
product's main AC disconnect device
and must be easily accessible at all
times.
10 kg (22 lbs)
Minimal sources of particulate contamination.
Avoid areas near frequently used doors and
walkways, stacks of supplies that collect dust,
printers, or smoke-filled rooms.
Excessive dust or debris can damage
Caution:
tapes and tape drives.
1