Retrieving Information About The Valueloader; Cycle Count; View Event Log - Freecom VALUELOADER LTO User Manual

Retrieving Information About the ValueLoader

3

Cycle Count

3

View Event Log

The "Test Count" displays the number of load-calibrate-unload
cycles that have been completed during the test.
Press the
4 [Cancel]
The Information menu provides access to information about the
ValueLoader, including the cycle count, event log, and firmware
revision.
This option displays the total system cycle count, incrementing
each time a tape is loaded into the drive or exported from the
ValueLoader.
To use this option:
From the Home Screen or main menu, press the
1
until "Information" appears on the top line of the LCD screen.
Press the
2 [Enter]
Press the or
3 [+] [-]
LCD screen.
The LCD screen displays the total cycle count.
Press the
4 [Cancel]
This option provides access to the most recent ValueLoader errors
and events (see table 5
To use this option:
From the Home Screen or main menu, press the
1
until "Information" appears on the top line of the LCD screen.
Press the
2 [Enter]
ValueLoader LTO Tape Autoloader User Manual

Retrieving Information About the ValueLoader

button to end the test.
button to access the available options.
button until "Cycle Count" appears on the
button when done.
on page 60 for a description of error codes).
button to access the available options.
ValueLoader Administration
or button
[+] [-]
or button
[+] [-]
3
43