Using Freecom Turbo Usb 2.0 (Only Pc) - Freecom Mobile Drive II User Manual

Chapter 5: Using Freecom Turbo USB .0 (only PC)
By installing the Turbo USB 2.0 driver for your Mobile Drive II, the data transfer rate can
be significantly increased (up to 40% faster transfer speed compared to standard High-
Speed USB).
Enabling the Turbo USB .0 driver
1. Connect the Freecom Mobile Drive II to your PC.
2. Run "Start.exe" from your Mobile Drive II and go to Software Installation -> Freecom
Turbo USB 2.0.
3. The Freecom Turbo USB 2.0 Wizard will open.
4. Check the drive and click on "Configure" to enable the Turbo USB2.0 driver for the
Freecom Mobile Drive II.
Disabling the Turbo USB .0 driver
1. Connect the Freecom Mobile Drive II to your PC.
2. Run "Start.exe" from your Mobile Drive II and go to Software Installation -> Freecom
Turbo USB 2.0.
3. The Freecom Turbo USB 2.0 Wizard will open. Uncheck the drive and click on "Configure"
to disable the Freecom Turbo USB 2.0 driver for the Freecom Mobile Drive II.

Using Freecom Turbo USB 2.0 (only PC)

EN
5
1