Valueloader Error Codes - Freecom VALUELOADER DLT User Manual

Diagnostics and Troubleshooting

ValueLoader Error Codes

ValueLoader Error Codes
62 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
If an error occurs during operation of the ValueLoader, the
ValueLoader stops the current operation and displays an error
code on the top line of the LCD screen. Unless otherwise noted in
table 5, attempt to resolve the error by resetting or cycling power
on the ValueLoader and retrying the last operation. If the error
persists, contact support personnel.
To view the error log, follow these steps:
From the Home screen or main menu, press the
1
until "Information" appears on the top line of the LCD screen.
Press the
2 [Enter]
Press the or
3 [+] [–]
the LCD screen. The LCD screen also displays the quantity of
errors and events stored in the error log.
Press the
4 [Enter]
message.
Press the or
5 [+] [–]
Press when done.
6 [Cancel]
A description of each of the error codes is provided in the
following table.
button to access the available options.
button until "View Event Log" appears on
button to access the most recently logged error
button to display each error in the log.
4
or button
[+] [–]