Ricoh Aficio 2045e General Settings Manual page 993

G Press [Manual Input] on the right
side of the path field.
The soft keyboard is displayed
for entering the path for the
folder.
H Enter the path for the folder.
Note
r This is an example of enter-
ing a pass to send to the sub-
folder "lib" in the folder "us-
er". user\lib
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
I Press [OK].
J If entering a user name to log
on is required, press [Manual In-
put] on the right side of the user
name.
The soft keyboard is displayed
for entering the user name.
K Enter the user name.
L Press [OK].
M If entering a password to log
on is required, press [Manual In-
put] for password.
The soft keyboard is displayed
for entering a password.
N Enter a password.
O Press [OK].
P To change the port number
which is set in the initial scan
setting, press [Change] on the
right side of the Port No. field.
Enter a port number using the
number keys, and then press
[#].
Sending Scan File by Scan to Folder
Q Press [Connection Test].
A connection test is performed
to check whether the specified
folder exists.
Note
r To change a path for the fold-
er that has been entered,
press [Change] located on the
left side of the destination
field. Enter a path for the
folder properly, and then
press [OK].
r Pressing the {Check Modes}
key on the control panel lets
you check the list of selected
destinations.
r The connection test some-
times takes time.
r [Connection Test] can not be
pressed right after [Cancel]
was pressed during the con-
nection test.
R To enter more destinations, re-
peat steps A to Q.
Note
r To deselect a destination,
press [U Prev.] or [T Next] to
display the destination in the
destination field, and then
press the {Clear/Stop} key.
S Press [OK].
5
65