Setting The Job Time Out - Kyocera KM-8530 User Manual

Setting the Job Time Out

You can set the value of the job time out setting from the control panel.
1.
Press the [Mode] button, to display the [Printer Mode Basic] screen.
The [Printer Mode Basic] screen will appear.
2.
Touch the [Controller Set] key.
The [Controller Set] screen will appear.
3.
Touch the [Job Time Out] key, and then touch the [OK] key.
The [Job Time Out Set] screen will appear.
Touch [▲] and [▼] to display the previous screen and the following screen of the [Job Time Out Set] screen
respectively.
4.
Touch the key for the value that you want to set.
5.
Touch the [OK] key.
The job time out is set according to your selection.
The [Controller Set] screen will appear.
Touch the [CANCEL] key if you want to return to the [Controller Set] screen without changing the setting.
6.
Touch the [CANCEL] key.
The [Printer Mode Basic] screen will appear.
Chapter 16 Configuration of Printer Setting Menu
489