Appletalk Setup - Kyocera KM-8530 User Manual

Setups on the Control Panel (Continued)
●

AppleTalk Setup

Lets you set up settings for printing via AppleTalk.
Enable AppleTalk
Lets you set whether AppleTalk is enabled or not. The default is [YES].
Printer Name
Lets you enter the name of a printer (NIC) used on an AppleTalk network.
• A maximum of 32 characters of symbols and alphanumeric characters is available.
Limitation
You cannot use the following symbols.
: (colon), @ (at mark), * (asterisk), ~ (tilde), = (equal sign), ( (left parenthesis), ) (right parenthe-
sis), - (hyphen)
Zone Name
Lets you enter the zone in which the Network Interface Card sits. Leave the field blank if there are no
zones to specify (on networks without seed routers). No prints can be produced without specifying the
correct zone.
• A maximum of 32 characters of symbols and alphanumeric characters is available.
533
Chapter 19 Copier Setup