Setting The Default Value For The Duplex - Kyocera KM-8530 User Manual

Setting the Default Value for the Duplex

You can set the default printing direction at the duplex printing from the control panel.
1.
Press the [Mode] button, to display the [Printer Mode Basic] screen.
The [Printer Mode Basic] screen will appear.
2.
Touch the [Set Default] key.
The [Set Default] screen will appear.
3.
Touch the [Duplex] key, and then touch the [OK] key.
The [Duplex Set] screen will appear.
4.
Touch the key for the printing direction at the duplex printing that you
want to set.
•
Off : set Duplex off (Default)
•
Long Edge : set Long Edge Duplex
•
Short Edge : set Short Edge Duplex
Chapter 16 Configuration of Printer Setting Menu
499