To Specify A User - Kyocera KM-8530 User Manual

To specify a user

Compliant
PCL5e
Set a User ID and a password to specify a user, when the Kyoceramita PCL5e printer driver is used. User ID
and password are used to print confidential documents and to save image.
Depending on the application software, there are also passwords that save the settings of the
printer driver. When printing was made with [Password Print Settings] done on the shared file
on the network or on a file other people may use for printing, delete [UserID] and [Password]
before saving the file.
●
Operating procedures of
1.
Open [Paper] tab of [Properties] window.
When displayed from an application with Windows 98.
2.
Click the [Settings] button.
The [Password Print] dialog box will appear.
When a user has already been set, or when a password has been set in the [POD] tab - [Image Stor-
age], the existing settings are displayed.
A password set in the [Paper] tab - [Settings] button - [Password Print] dialog box, and a password set in the [POD]
tab - [Image Storage] check box - [Job Combination Print Storage] dialog box are saved as one password. A pass-
word that is set later takes precedence over those saved previously.
(p.256) To print with protection by a password
Reference
PCL5e
254
Chapter 5 Printing from Windows