Kyocera KM-8530 User Manual page 161

To set the type of manual-feed paper (Continued)
●
Operating procedures of
Limitation
[OHP] cannot be set in the following cases:
• When [Duplex], [Staple] or [Punch] is selected in [Paper] tab - [Features] field
• When [Fold & Stitch] or [Booklet] is available in [Paper] tab - [Features] field
[OHP(interleave)] cannot be set in the following cases:
• When [Duplex], [Staple] or [Punch] is selected in [Paper] tab - [Features] field
• When [Fold & Stitch] or [Combination] - [Booklet] is available in [Paper] tab - [Features] field
• When [Collate] is not available in [Paper] tab
• When any item in [Cover] tab is available
• When [Duplex], [Staple] or [Punch] is selected in [Paper] tab - [Features] field
• When [Fold & Stitch] or [Combination] - [Booklet] is available in [Paper] tab - [Features] field
[Tab sheet] cannot be set in the following cases:
• When settings other than [8.5 x 11, 11 x 17, A3, A4, B5] in [Paper] tab - [Paper size]
• When [Fold & Stitch] is available in [Paper] tab - [Features] field
If you attempt to make a setting corresponding to the incongruous combinations described that cannot be set on
the printer driver, a message will be displayed. Check the details of message and adjust the relationship with other
settings.
1.
Open [Paper] tab of [Properties] window.
When displayed from an application of Windows 98.
2.
Click the [▼] button beside the [Paper Source] box to display the list.
Then select [Bypass tray] from the list.
The default is [Auto Select].
PCL5e
161
Chapter 5 Printing from Windows