To set the Large Capacity Tray (Continued)
●
Operating procedures of
1.
Open [Setup] tab of [Properties] window.
When displayed from [Printers] window with Windows 98.
When nothing is selected, it is not possible to use [Tray 4].
2.
Select a Large Capacity Tray you want to use from the [Available
options] list.
When the copier is provided with an optional Large Capacity Tray, select either [LT-402 Large Capac-
ity Tray] or [LT-412 Large Capacity Tray].
When you do not know if the optional Large Capacity Tray installed is a [LT-402 Large Capacity Tray] or [LT-412
Large Capacity Tray], consult your system administrator.
3.
Click the [OK] button to close the [Properties] window.
PCL5e
174
Chapter 5 Printing from Windows