Kyocera KM-8530 User Manual page 439

Scan to Email (Continued)
5.
Set the necessary settings on the [Transmission Address Input]
screen(Email).
Input the subject on the [Title in Email Input] screen that is displayed when you touch the [TITLE] key.
(p.440)
Reference
[Entry Name] key
Enter the name of a recipient, up to 18 alphanumeric characters long, that will be displayed in the desti-
nation (Email) on the [Select Transmission Object] screen (Email). To enter alphabetical letters, use the
touch panel, and to enter numbers, use the hard keypad.
You cannot enter signs.
[E-Mail Address] key
Enter an Email address, up to 60 alphanumeric characters long. To enter alphabetical letters, use the
touch panel, and to enter numbers, use the hard keypad.
[Delete] key
Touch this key to delete the letter to the left of the cursor.
[Capital/Small] key
Touch this key to replace an upper case letter with a lower case and vice versa.
[Sign] key
Touch this key and the lowercase alphabetical letter keys produce signs. (The [Sign] key is changed to
the [Alphabet] key.) Touch this key again and you can enter alphabetical letters as before.
[TITLE] key
Touching this key opens the [Title in E-Mail input] screen.
(p.440)
Reference
[ ] keys
Touching these keys moves the cursor. Letters enter to the left of the cursor.
[ENTRY] key
Touch this key to register information you have entered and return to the [Select Transmission Object]
screen (Email).
To change or delete registered Destinations/Storage Locations, use the Key Operator mode or the WWW Server
Function of the copier. For more detailed information, refer to the "Copier's User's Manual."
[CANCEL] key
Touching this key brings you back to the [Select Transmission Object] screen (Email) without registering
what you have entered.
[OK] key
Touching this key opens the [Scanner Setting Basic] screen.
Chapter 11 Configuring Destination/Storage Loca-
439
tion Settings