Installation Of Printer Driver - Kyocera KM-8530 User Manual

Installation of Printer Driver

When all settings are completed, install the printer driver. When you are using IP Peer-to-Peer, specify the con-
nection type as [Local], and the printer name set in IP Peer-to-Peer to the [Printer Port].
For more information on installation and setting of the printer driver, refer to "Section 2 How to Print" in this Manual.
(p.37)
Reference
1.
Turn on the computer and start Windows.
Exit from all active Windows applications, if required.
2.
Click the [Start] button of the task bar. Then, select [Settings] from the
Start menu to click [Printers] from the sub-menu.
The [Printers] window will open.
Shut down all open Windows applications.
3.
Double-click the [Add Printer] icon of the [Printers] window.
The [Add Printer Wizard] will appear to set the printer.
4.
Click the [Next] button.
The window to select the printer manufacturer and model will appear.
5.
Select [Local] and click the [Next] button.
The window to select the printer manufacturer and model will appear.
6.
Click the [Have Disk] button.
The [Install From Disk] window will appear.
7.
Click the [Browse] button.
The [Open] window will appear.
8.
Set the "User Software CD" on the CD-ROM drive.
9.
Change [Drive] to the CD-ROM drive.
From the [Folder] list, double-click on "English\Printer\Win9x_Me" folder. If [Setup.inf] is displayed on
the list of [File] name, click the [OK] button. The [Install From Disk] window will appear.
10.
Click the [OK] button.
The next [Add Printer Wizard] window to select the printer manufacturer and model will appear.
11.
Be sure that in the list of [Printers], [Kyocera Mita KM-8530 PCL] is
highlighted, then click the [Next] button.
The next [Add Printer Wizard] window to assign a port will appear.
The model name of print controller is displayed in [xxx].
Chapter 20 Printing by IP Peer-to-Peer from Win-
550
dows 95/98/Me