Kyocera KM-8530 User Manual page 257

To print with protection by a password (Continued)
2.
Turn on the [Password Print] check box.
The [Password Print] dialog box will appear.
When the user setup is not yet made, a message "User ID must be entered." is displayed.
3.
Confirm the User ID and password.
A password set in the [Paper] tab - [Settings] button - [Password Print] dialog box, and a password set in the [POD]
tab - [Image Storage] check box - [Job Combination Print Storage] dialog box are saved as one password. A pass-
word that is set later takes precedence over those saved previously.
4.
When changing the password, enter a new password (up to 8 digits) in
the [Password] box.
A password that has already been set is cancelled when a password is entered, and the new one
becomes valid.
5.
Click the [OK] button.
The [Password Print] dialog box disappears and the display returns to the [Properties] window.
6.
Click the [OK] button to close the [Properties] window.
7.
Print from the application.
The procedures on and after Step 8 show the operation on the control panel of the copier.
8.
Press the [MODE] button to display the print mode basic screen and
display [Password Print] touch key.
9.
Touch the [Password Print].
[User ID] key, [Password] key and numeric key etc. are displayed.
Chapter 5 Printing from Windows
257